4.6

• Reworked effect selection in setup tool to a list of effect packages instead of individual files
• Improved API detection in setup tool (and automatic selection for a known list of games)
• Improved performance for effects with many passes that write to custom render targets
• Improved D3D12 resource state management
• Improved line information for errors in evaluated preprocessor macros
• Added setup tool self-verfication at startup, which will show an error if the archive is corrupted immediately
• Added default log file to help with troubleshooting
• Added option to skip application scanning in setup tool by pressing "Alt" button while clicking on "Select ..."
• Added Vulkan memory allocator for improved memory management
• Added error message to log when DXGI encounters a device loss
• Added parser error when encountering a interpolation qualifier mismatch between vertex and pixel shaders
• Added parser error when encountering a vertex or pixel shader parameter without semantics
• Added preprocessor error when encountering an unterminated string literal
• Added limit to the number of compile error messages shown
• Added missing license statements to about page in UI
• Added configuration file fall back for technique sorting (reads "TechniqueSorting" from "GENERAL" section if preset does not define it)
• Added FreePIE IO support

  uniform float3 io_data[2] < source = "freepie"; index = 0; >;
  // io_data[0].xyz = yaw, pitch, roll
  // io_data[1].xyz = position

• Added image format list to Vulkan image creation for improved performance on some hardware
• Added shortcut keys for code editor search and replace
• Added code editor option to search and replace case insensitive
• Added support for leaving code editor focus with escape key
• Added support for "#" comments in INI files
• Added Vulkan API version to renderer ID (__RENDERER__)
• Added built-in "__FILE_NAME__" and "__FILE_STEM__" preprocessor macros
• Added more enum names to HRESULT values in log messages
• Added support to render point and line primitives from effects

  pass {
    PrimitiveTopology = POINTLIST; // LINELIST, LINESTRIP, TRIANGLELIST, TRIANGLESTRIP
    VertexCount = 10;
  }

• Added special uniform to check if UI is open

  uniform bool is_open < source = "overlay_open"; >;

• Changed setup tool to set buffer detection settings based on compatibility list
• Change "application" to "game" in setup tool descriptions
• Changed Vulkan depth buffer detection to use same heuristic as D3D9/OpenGL
• Changed default of "RESHADE_DEPTH_INPUT_IS_REVERSED" to 0 again
• Changed uniform boolean representation to use "1" and "0" instead of "-1" and "0"
• Changed effect tabs in UI variable list to stay in place when scrolling
• Changed UI screenshot creation to only attempt to create it if UI is actually open
• Changed effect preprocessor to only add preprocessor definitions to UI if their declaration is active
• Changed reload behavior to open the last edited code file again
• Changed code editor colorization to colorize a few additional lines above and below an edit for better multi-line comment handling
• Fixed keyboard navigation in setup tool
• Fixed setup tool crash when trying to change an empty preset path
• Fixed setup tool exit button not being shown while asking about existing installation
• Fixed text rendering in Spellforce 3 and image turning too dark sometimes
• Fixed missing UI in old OpenGL games using the "glVertexPointer" API (e.g. Call of Duty)
• Fixed error when launching Metro Exodus in D3D12 (because of missing "DXGIGetDebugInterface1" export)
• Fixed crash on systems where render GPU is not attached to the output display (e.g. on laptops with Optimus etc.) (thanks to sherief)
• Fixed crash when switching fullscreen mode when render GPU is not the display GPU
• Fixed crash in WineD3D and OpenGL games
• Fixed crash in Valkyria Chronicles when changing depth buffer detection settings
• Fixed crash in Call of Duty: Modern Warfare
• Fixed crash in D3D12 device creation when interface is not supported
• Fixed crash and "ID3D11Device::CreateShaderResourceView" errors in D3D10/11 games using MSAA or array depth stencil resources
• Fixed crash in effect preprocessor when input file is not terminated with a new line
• Fixed crash in D3D12 if runtime is reset before initialization
• Fixed crash in Resident Evil 3
• Fixed potential crash in D3D12 when changing resolution
• Fixed device loss in D3D12 in games creating depth-stencil resources with "ID3D12Device::CreateReservedResource"
• Fixed potential device loss in D3D12/Vulkan when switching UI tabs
• Fixed vertex shader usage of textures in D3D12
• Fixed D3D12 screenshots failing for RGB10A2 back buffer format
• Fixed D3D12 depth binding not being updated sometimes without reloading (e.g. in Strange Brigade)
• Fixed "bufready_depth" uniform not working in D3D9/10/11
• Fixed spacing in UI for depth buffer clears
• Fixed D3D9/10/11 textures not being cleared to zero when not used as render target
• Fixed duplicated error log messages if preprocessing step failed during effect compilation
• Fixed FPS overlay showing cut off at bottom of screen if text scale is larger than one
• Fixed GLSL code generation for integer varying variables
• Fixed locations for varyings with custom semantics in GLSL code generation
• Fixed GLSL and SPIR-V code generation for semantics with numbers other than "TEXCOORD"
• Fixed GLSL and SPIR-V code generation for uniform arrays
• Fixed function name in pass state validation error messages
• Fixed log message for special sample quality in swapchain description
• Fixed key down state being reset even if key is actually still held down
• Fixed code editor replace all not replacing all occurances in a document
• Fixed error handling in D3D10/11 runtime initialization
• Fixed reloading after a failed preprocessor definition change causing the effect to fail compiling
• Fixed Vulkan driver version displayed in the UI for NVIDIA drivers
• Fixed D3D11 immediate context interface version not being upgraded in "ID3D11Device::GetImmediateContext1/2" calls
• Fixed UI screenshot being taken of a different frame than the effect screenshot
• Fixed render artifacts in some D3D9 games because of INTZ usage that could not be disabled with high network activity
• Fixed potential issue with "CreateDXGIFactory2" writing to non-existent VTable entries
• Fixed line information for string literals that span multiple lines
• Fixed "#ifdef" and "#ifndef" not responding to built-in preprocessor defines
• Fixed artifacts in Vulkan applications presenting on a different queue than the rendering one
• Fixed OpenGL resources leaking when window was destroyed before calling "wglDeleteContext"
• Updated Vulkan layer API version to 1.2
• Removed unnecessary barriers in D3D12 depth buffer detection
• Removed support for point size builtin semantic (since it is not supported in D3D11)

• Added individual effect file selection dialog to setup tool again
• Added help text to setup tool dialogs to explain them to new users
• Added option to relax modifier state checks for shortcuts
  See reshade.me/forum/troubleshooting/6358-re...r-with-modifier-keys
• Fixed corrupted image in Vulkan with effects that read and write to custom render targets
• Fixed stencil data looking corrupted in Vulkan
• Fixed input/output parameter structure flattening in SPIR-V code generation
• Fixed crash in AMD driver bug workaround
• Fixed "ReShadeGUI.ini" not always being created in the same directory as the "ReShade.ini" configuration file
• Fixed preprocessor errors not showing up in log
• Fixed macros used inside "#include" statement not working in included file
• Changed setup tool texture directory search to include "jpg" and "jpeg" extensions
• Changed "Cancel" button caption in setup tool effect package selection to "Skip"
• Changed "Standard effects" package to be a required package that cannot be deselected (since it contains ReShade.fxh which is used by many effects)

OtisInf wrote: "Added support to render point and line primitives from effects"

Is there an example for this? I.e. do I need to build a vertex buffer from a pixelshader pass and then have this pass to render the points?

#define NUM_LINES 5

void MyVS(uint id : SV_VERTEXID, out float4 pos : SV_POSITION)
{
	pos = float4((id / float(NUM_LINES * 2 - 1)) * 2 - 1, 0, 0, 1);
}
void MyPS(float4 pos : SV_POSITION, out float4 col : SV_TARGET)
{
	col = float4(1, 0, 0, 1);
}

technique Lines
{
	pass
	{
		VertexShader = MyVS;
		PixelShader = MyPS;
		PrimitiveTopology = LINELIST;
		VertexCount = NUM_LINES * 2;
	}
}

JoeStapf wrote: Failed to compile (68,1) Undetermined String Liternal <- Might not be the exact message, my memory is poo. But it fails to compile non-the-less.

TakahashiXD wrote: Excellent job!
Too bad it still doesn't work with Prey (2017).